TOP Electronic Industry Co., Ltd.
TOP is a professional electronic components distributor in China. we offer one-stop solution service , from communication modules , antennas , PCB , PCBA , and all components for PCB Bom.
Add to Cart
2.4 Ghz Wifi Antenna 2 Dbi 9mm Diameter Wifi Yagi Antenna Outdoor
andnbsp;
andnbsp;
Introduction :
Total Length of the antenna: including the connector 115mm
Diameter : 9mm
Connector : SMA normally, can be made SMB,TNC etc
Body color: white, black, gray or customized.
andnbsp;
1andnbsp; Electrical Characteristics
andnbsp;
Form 1
| No. | Item | Specifications |
| 1 | Frequency(MHz) | 2400~2500 MHz |
| 2 | V.S.W.R(in BW) | andle;2.0:1 |
| 3 | Gain(Zenith) | 2 dBi |
| 4 | Polarization | Vertical |
| 5 | Impedance | 50 andOmega; |
1.2andnbsp;andnbsp;andnbsp;andnbsp; Mechanical
Form 2
| No. | Item | Specification |
| 1 | Cable | andmdash; |
| 2 | Connector | SMA-JW |
| 3 | Plastic Housing | White |
andnbsp;
andnbsp;
andnbsp;
2andnbsp;andnbsp;andnbsp; Environmental Specifications
andnbsp;
Post Environmental Tolerance (Refer to the form 1~2 )
Condition: Temperature range 25andplusmn;3anddeg;C
Relative Humidity range 55~75%RH
Operating Temperature range -40anddeg;C~+85anddeg;C
Storage Temperature range -40anddeg;C~+100anddeg;C
4.1 Moisture Proof
The device should satisfy the electrical characteristics specified in form 1~2 after exposed to the temperature 40andplusmn;2anddeg;Cand the relative humidity 90~95% RH for 96 hours and 1~2 hours recovery time under normal condition.
4.2 Vibration Resist
The device should satisfy the electrical characteristics specified in form 1~2 after applied to the vibration of 10 to 55Hz with amplitude of 1.5mm for 2 hours each in X , Y and Z directions.
4.3 Drop Shock
The device should satisfy the electrical characteristics specified in form 1~2 after dropping onto the hard wooden board from the height of 30cm for 3 times each facet of the 3 dimensions of the device.
4.4 High Temperature Endurance
The device should satisfy the electrical characteristics specified in form 1~2 after exposed to temperature 80andplusmn;5anddeg;Cfor 24andplusmn;2 hours and 1~2 hours recovery time under normal temperature.
4.5 Low Temperature Endurance
The device should also satisfy the electrical characteristics specified in form 1~2 after exposed to the temperature -40anddeg;Candplusmn;5anddeg;Cfor 24andplusmn;2 hours and to 2 hours recovery time under normal temperature.
4.6 Temperature Cycle Test
The device should also satisfy the electrical characteristics specified in form 1~2 after exposed to the low temperature -25anddeg;C and high temperature +85anddeg;C for 30andplusmn;2 min each by 5 cycles and 1 to 2 hours recovery time under normal temperature.
andnbsp;
andnbsp;
Click here to find the data sheet:
andnbsp;
andnbsp;
andnbsp;
Antenna display:
andnbsp;
andnbsp;
Ourandnbsp; Antenna :
---Powerful Randamp;D team
---Wonderful design solution
---Perfect after-sales service
---Strict quality testing
---Rich cooperation experiences with Communication product manufactures
---Competitive price
andnbsp;
FAQ
andnbsp;1. Whatand#39;s the Warranty of the Products?
Answer: In general, all goods with 12 month-warranty after the shipments .
andnbsp;
2. andnbsp;How about the defective rateandnbsp;?
Answer: Less than 1%.
andnbsp;andnbsp;
andnbsp;3. Where can customers get the Product Specification and other datasheets?
Answer: we will send them via email once get the request from the customers.
andnbsp;
andnbsp;Our high quality products , competitiveandnbsp; price and professional service, be sure to meet your need for all kinds of components.andnbsp;andnbsp;andnbsp; ^_^
andnbsp;
andnbsp;
andnbsp;
you are welcome to visit our website to learn more information of our productions:
www.topelecind.com
andnbsp;