
Add to Cart
BZX84C15LT3G 15V Zener SOT-23 225mW Low Leakage Current High Stability Surge Protection Halogen-Free Tape & Reel Packaging Ideal for Space-Constrained PCBs
Features
• 250 mW Rating on FR−4 or FR−5 Board
• Zener Breakdown Voltage Range − 2.4 V to 75 V
• Package Designed for Optimal Automated Board Assembly
• Small Package Size for High Density Applications
• ESD Rating of Class 3 (> 16 kV) per Human Body Model
• Tight Tolerance Series Available (See Page 4)
• SZ Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q101 Qualified and PPAP Capable
• These Devices are Pb−Free and are RoHS Compliant
Applications
1:Voltage Clamping & Over-Voltage Protection: Used to protect sensitive input pins of integrated circuits (ICs) or MOSFETs from damage caused
by electrostatic discharge (ESD), voltage spikes, or accidental over-voltage.
2“Voltage Reference: Provides a simple, stable reference voltage for circuits like ADCs (Analog-to-Digital Converters), DACs (Digital-to-Analog
Converters), or voltage comparators.
3:Waveform Clipping: Converting sine waves or other waveforms into approximate square waves.
4:Power Supply Regulation: Acts as a simple voltage regulator in low-current, non-precision power supply circuits.
Description
1:Zener Voltage:
Nominal Value: 15V
This is a key parameter indicating its stable reference voltage. In practical application, it has a tolerance range.
For the BZX84C15LT3G, the Zener voltage tolerance is ±5%. This means under specific test conditions, its actual regulating voltage typically falls
between 14.25V and 15.75V.
2:Power Dissipation:
Maximum Continuous Power Dissipation: 350 mW
This is an important limit determining the maximum power the diode can safely handle (Power = Zener Voltage × Zener Current). Circuit design
must ensure the operating current does not cause the power dissipation to exceed this value, otherwise the diode may overheat and be damaged.
3:Package:
SOT-23
This is a very common 3-pin small surface mount package suitable for high-density PCB design.
4:Technology:
Single Chip: Unlike some dual-diode packages, the SOT-23 package of the BZX84C15LT3G contains only a single Zener diode.
5:Performance Characteristics:
Very Sharp Breakdown Characteristic: Indicates good voltage regulation performance.
Low Leakage Current: The reverse leakage current is very small when the voltage is below the Zener voltage.
Low Impedance: Features good dynamic response characteristics.
INFORMATION
Category | | |
Mfr | | |
Series | | |
Packaging | Tape & Reel (TR) Cut Tape (CT) Digi-Reel® | |
Part Status | Active | |
Voltage - Zener (Nom) (Vz) | | |
Tolerance | ±6% | |
Power - Max | 250 mW | |
Impedance (Max) (Zzt) | 30 Ohms | |
Current - Reverse Leakage @ Vr | 50 nA @ 10.5 V | |
Voltage - Forward (Vf) (Max) @ If | 900 mV @ 10 mA | |
Operating Temperature | -65°C ~ 150°C (TJ) | |
Grade | - | |
Qualification | - | |
Mounting Type | Surface Mount | |
Package / Case | | |
Supplier Device Package | SOT-23-3 (TO-236) | |
Base Product Number |
Drawing
Our advantage :phones, PDA's, notebook comput.ers
be sure to meet your need for all kinds of components. ^_^
Product List
Supply a Series of Electronic Components, full range of semiconductors, active & passive Components.We can help you to get all for bom of the PCB,IN a word, you can get one-stop solution here,
The offers including:
Integrated Circuit, Memory ICs, Diode, Transistor , Capacitor, Resistor, Varistor, Fuse, Trimmer & Potentiometer, Transformer, Battery, Cable, Relay, Switch, Connector, Terminal Block, Crystal & Oscillator, Inductor, Sensor, Transformer, IGBT Driver, LED,LCD, Convertor, PCB (Printed Circuit Board),PCBA (PCB Assembly)
Strong in Brand:
Microchip, MAX, AD, TI, ATMEL, ST, ON, NS, Intersil, Winbond, Vishay, ISSI, Infineon, NEC, FAIRCHILD, OMRON,YAGEO, TDK, etc